Fall Protection · Tower, rescue & rope accessPro-Guard Tower & Rescue Harness Five points for complex work at height.
A heavy-duty full body harness for tower climbing, rescue, rope access and work positioning. Dorsal, sternal, ventral and two lateral attachment points, CED-coated alloy-steel fittings salt-spray tested for 500+ hours, and four EN standards.
Made for the job
Typical applications. Your risk assessment and rescue plan decide the right harness for each task.
Telecom & transmission towers
Climb, position and work with both hands free.
Rescue operations
Rescue-ready construction with front and ventral attachment.
Rope access
Ventral attachment for rope access and suspension work.
Wind, chimneys & structures
Long jobs where positioning and comfort matter.
What it does, with the numbers
- 5 attachment points: Dorsal and sternal for fall arrest, ventral for rope access and suspension, two lateral D-rings for positioning.
- Large lateral D-rings: Room for positioning lanyards and gloved hands.
- CED-coated fittings: Alloy-steel fittings with CED coating, tested for more than 500 hours of salt spray.
- Heavy-duty webbing: Upgraded, high-tenacity polyester registered webbing with retro-reflective stitching.
5 attachment points
Dorsal and sternal for fall arrest, ventral for rope access and suspension, two lateral D-rings for positioning.
5 pointsLarge lateral D-rings
Room for positioning lanyards and gloved hands.
PositioningCED-coated fittings
Alloy-steel fittings with CED coating, tested for more than 500 hours of salt spray.
500 h+Heavy-duty webbing
Upgraded, high-tenacity polyester registered webbing with retro-reflective stitching.
VisibleID plate & label protector
Keeps identification legible for inspection records.
Traceable2 adjustment points
Shoulder and thigh straps for a secure fit.
FitA closer look
Order by code
Quote these codes on your purchase order.
| Code | Supplied as | Contents | Use |
|---|---|---|---|
| PGH-05 | Harness | Pro-Guard Tower & Rescue Harness | Choose your own lanyards and connectors |
| PGH-19 | Harness set | PGH-05 harness + energy-absorbing double lanyard | Climbing and moving with 100% tie-off |
| PGH-18 | Harness set | PGH-05 harness + energy-absorbing double lanyard + work-positioning lanyard | Tower work: climb with 100% tie-off, then position hands-free |
Full technical specifications
From the current Jarsh technical data sheet. Ask us for the data sheet PDF with your quote.
Full specificationsPGH-05
Harness
- Type
- Tower & rescue full body harness
- Attachment points
- Dorsal, sternal, ventral and 2 lateral (5)
- Adjustment
- Shoulder and thigh straps
- Weight
- 2.38 kg
- Size
- Medium–Large
Materials
- Webbing
- High-tenacity polyester
- Metal fittings
- CED-coated alloy steel
- Corrosion
- Metal components tested to more than 500 h salt spray
- Stitching
- Retro-reflective yarn
Compliance
- Fall arrest
- EN 361:2002
- Work positioning
- EN 358:2018
- Sit harness (ventral)
- EN 813:2008
- Lanyards
- EN 354:2018
- Marking
- CE
Specifications per Jarsh PGH-05 Pro-Guard Full Body Harness technical data sheet, V0.2 · 12.2025.
Compliance you can check
Standards and test results as stated on the technical data sheet. Certificates are supplied with your quotation.
EN 361:2002
Full body harnesses for fall arrest.
EN 358:2018
Belts and lanyards for work positioning and restraint.
EN 813:2008
Sit harnesses: safe ventral attachment for rope access and suspension work.
EN 354:2018
Lanyards, as listed on the data sheet.
CE marked
CE marking is shown on the data sheet. Ask us for the certificate with your quote.
Salt-spray tested
Metal components tested for more than 500 hours of salt spray.
PPE you can trust is PPE you inspect
Train every user before first use, and have a rescue plan ready before anyone works at height.
- Inspect before every use: webbing and stitching for cuts, abrasion, burns or chemical damage; buckles, D-rings and loops for deformation, cracks or corrosion; the label must be legible.
- Withdraw the harness from use after it has arrested a fall, or if any part fails inspection. Don't repair it on site.
- Fit it snugly: adjust shoulder, chest and thigh straps so a flat hand just fits under each strap.
- Connect for fall arrest only at the points marked for it. Work-positioning points are not fall-arrest points.
- Clean with a soft, dry cloth. Store in a cool, dry place away from UV and direct sunlight, chemicals and sharp edges.
- Have a competent person examine it periodically as your regulations require. Ask us for the inspection checklist.
Compare the harness range
Seven harness families side by side. “—” means the data sheet doesn't state it. For live-line work see the Kavach™ Dielectric Harness.
| PGH-01Confined Space | PGH-02Full Body | PGH-04Jacket | PGH-05Tower & Rescue | PGH-07(AS)Antistatic | PGH-03 (DE)Dielectric | ESH-03(DT)EssentiA™ | |
|---|---|---|---|---|---|---|---|
| Use | |||||||
| Best for | Confined space, ladders, shafts | General fall arrest, long shifts | Hi-vis sites, roads, tunnels | Towers, rescue, rope access | Where static discharge is a hazard | Near electrical hazards | Everyday construction crews |
| Attachment | |||||||
| Fall arrest | Dorsal D-ring · sternal O-ring | Dorsal D-ring · 2 chest loops | Dorsal D-ring · 2 chest loops | Dorsal · sternal | Dorsal D-ring · 2 front loops | Dorsal D-ring · sternal | Per version (see page) |
| Work positioning | 2 side D-rings | 2 lateral D-rings | 2 lateral D-rings | ||||
| Ventral (rope access) | |||||||
| Build | |||||||
| Webbing strength | 25 kN MBS | — | 22 kN min | — | 25 kN min | — | ≥ 23 kN |
| Hardware | Black-anodized steel, 15 kN | Aluminium buckles | Alloy-steel buckles | CED-coated alloy steel | Polished aluminium | Dielectric, polymer-coated | CED-coated steel |
| Salt-spray tested | — | — | — | 500 h+ | 500 h+ (D-ring) | — | 500 h |
| Weight | — | 1.75 kg | 950 g | 2.38 kg | — | 2.36 kg | 1.30 kg |
| Max user weight | — | 140 kg | — | — | — | 140 kg | — |
| Hi-vis | Orange webbing | Retro-reflective | Fluorescent jacket + tape | Reflective stitching | — | Reflective strips | |
| Standards (per data sheet) | |||||||
| Standards | EN 361 · EN 358 | EN 361 | EN 361 | EN 361 · 358 · 813 · 354 | EN 361 | EN 361 · EN 358 | EN 361 · IS 3521-1 |
| View → | View → | View → | This page | View → | View → | View → | |
A harness is one part of a fall-arrest system
Fall arrester block
Retractable lifelines from 2 to 20 m, including a retrieval block and the Smart Block. Choose a block →
ConnectLanyards & connectors
Energy-absorbing and positioning lanyards, and EN 362 carabiners. Lanyards → · Connectors →
LanyardAnchors & lifelines
Anchor slings, a beam trolley, the Rapid Line and engineered fixed lifelines. Anchors → · Fixed Line Systems →
AnchorCommon questions
Can't find what you need? Call +91 8340 84 84 84 or write to info@jarshsafety.com.
How many attachment points does it have?
Can it be used for rope access?
Will the fittings corrode on coastal or chemical sites?
What does it weigh?
What are PGH-19 and PGH-18?
What is the service life and warranty?
Do you supply in bulk and work with dealers?
Get a quote for the Pro-Guard Tower & Rescue Harness.
Tell us the quantity, sizes and the work. We reply within 24 hours with pricing, lead time, the data sheet and certificates.
Our team replies within 24 hours.