Fall Protection · Everyday construction harnessEssentiA™ Harness The everyday harness, done properly.
A 1.30 kg full body harness for construction and maintenance crews, tested to EN 361:2002 and IS 3521 (Part 1):2021. CED-coated steel hardware salt-spray tested for 500 hours, quick-release buckles and reflective strips. Three versions: dual-tone with webbing loops, standard, and with D-ring.
Made for the job
Typical applications. Your risk assessment and rescue plan decide the right harness for each task.
Construction
Everyday fall arrest for site crews.
Maintenance
Plant, buildings and access platforms.
Industrial sites
General work at height.
Outdoor work
Water-resistant and UV-protected for long outdoor life.
What it does, with the numbers

- Tested to two standards: EN 361:2002 and IS 3521 (Part 1):2021, static and dynamic.
- CED-coated steel: High-strength steel hardware, CED coated, free from sharp edges, 500 h neutral salt spray.
- Quick-release buckles: Fast donning and removal.
- Reinforced stitching: At stress points, to prevent tearing.
Tested to two standards
EN 361:2002 and IS 3521 (Part 1):2021, static and dynamic.
EN · ISCED-coated steel
High-strength steel hardware, CED coated, free from sharp edges, 500 h neutral salt spray.
500 hQuick-release buckles
Fast donning and removal.
QuickReinforced stitching
At stress points, to prevent tearing.
DurableReflective strips
Visibility in low light.
VisibleModular design
Attach accessories and tools.
ModularA closer look




Order by code
Quote these codes on your purchase order.



Swipe the table to see every column →
| Code | Version | Look | Weight | Specification |
|---|---|---|---|---|
| ESH-03(DT) | With webbing loops | Dual-tone black and orange; tangle-free, easy donning and doffing | 1.30 kg | As above |
| ESH-04 | Standard | Black with yellow trim | 1.30 kg | As above |
| ESH-05 | With D-ring | Black with yellow trim | 1.30 kg | As above |
Full technical specifications
From the current Jarsh technical data sheet. Ask us for the data sheet PDF with your quote.
Full specificationsESH-03(DT) · ESH-04 · ESH-05
Webbing & stitching
- Webbing
- High-tenacity polyester
- Width
- 44 mm ± 1 mm
- Breaking strength
- ≥ 23 kN
- Stitching
- High-tenacity polyester
Hardware
- Metal components
- High-strength steel
- Finish
- CED coated, corrosion resistant, free from sharp edges
- Salt spray
- 500 h neutral salt spray
Physical
- Weight
- 1.30 kg ± 10 g
- Adjustment
- Multiple adjustment points
- Buckles
- Quick-release
Testing
- Static strength
- 15 kN for 3 min, as per EN 361:2002 and IS 3521 (Part 1):2021
- Dynamic performance
- 100 kg drop test, 4 m free fall, feet-first and head-first; post-fall angle < 50°
Specifications per Jarsh EssentiA ESH-03(DT), ESH-04 and ESH-05 technical data sheets, V0.2 · 11.2025.
Compliance you can check
Standards and test results as stated on the technical data sheet. Certificates are supplied with your quotation.
EN 361:2002
Full body harnesses for fall arrest.
IS 3521 (Part 1):2021
Indian Standard for full body harnesses in fall-arrest systems.
Dynamic test
100 kg dummy, 4 m free fall, passed feet-first and head-first.
Test results
Swipe the table to see every column →
| Test | Result | Standard |
|---|---|---|
| Static strength | 15 kN, held for 3 minutes | EN 361:2002 · IS 3521 (Part 1):2021 |
| Dynamic, feet-first | 100 kg dummy, 4 m free fall | EN 361:2002 · IS 3521 (Part 1):2021 |
| Dynamic, head-first | 100 kg dummy, 4 m free fall | EN 361:2002 · IS 3521 (Part 1):2021 |
| Post-fall angle | < 50° | EN 361:2002 |
PPE you can trust is PPE you inspect
Train every user before first use, and have a rescue plan ready before anyone works at height.
- Inspect before every use: webbing and stitching for cuts, abrasion, burns or chemical damage; buckles, D-rings and loops for deformation, cracks or corrosion; the label must be legible.
- Withdraw the harness from use after it has arrested a fall, or if any part fails inspection. Don't repair it on site.
- Fit it snugly: adjust shoulder, chest and thigh straps so a flat hand just fits under each strap.
- Connect for fall arrest only at the points marked for it. Work-positioning points are not fall-arrest points.
- Clean with a soft, dry cloth. Store in a cool, dry place away from UV and direct sunlight, chemicals and sharp edges.
- Have a competent person examine it periodically as your regulations require. Ask us for the inspection checklist.
Compare the harness range
Seven harness families side by side. “—” means the data sheet doesn't state it. For live-line work see the Kavach™ Dielectric Harness.
Swipe the table to see every column →
| PGH-01Confined Space | PGH-02Full Body | PGH-04Jacket | PGH-05Tower & Rescue | PGH-07(AS)Antistatic | PGH-03 (DE)Dielectric | ESH-03(DT)EssentiA™ | |
|---|---|---|---|---|---|---|---|
| Use | |||||||
| Best for | Confined space, ladders, shafts | General fall arrest, long shifts | Hi-vis sites, roads, tunnels | Towers, rescue, rope access | Where static discharge is a hazard | Near electrical hazards | Everyday construction crews |
| Attachment | |||||||
| Fall arrest | Dorsal D-ring · sternal O-ring | Dorsal D-ring · 2 chest loops | Dorsal D-ring · 2 chest loops | Dorsal · sternal | Dorsal D-ring · 2 front loops | Dorsal D-ring · sternal | Per version (see page) |
| Work positioning | 2 side D-rings | 2 lateral D-rings | 2 lateral D-rings | ||||
| Ventral (rope access) | |||||||
| Build | |||||||
| Webbing strength | 25 kN MBS | — | 22 kN min | — | 25 kN min | — | ≥ 23 kN |
| Hardware | Black-anodized steel, 15 kN | Aluminium buckles | Alloy-steel buckles | CED-coated alloy steel | Polished aluminium | Dielectric, polymer-coated | CED-coated steel |
| Salt-spray tested | — | — | — | 500 h+ | 500 h+ (D-ring) | — | 500 h |
| Weight | — | 1.75 kg | 950 g | 2.38 kg | — | 2.36 kg | 1.30 kg |
| Max user weight | — | 140 kg | — | — | — | 140 kg | — |
| Hi-vis | Orange webbing | Retro-reflective | Fluorescent jacket + tape | Reflective stitching | — | Reflective strips | |
| Standards (per data sheet) | |||||||
| Standards | EN 361 · EN 358 | EN 361 | EN 361 | EN 361 · 358 · 813 · 354 | EN 361 | EN 361 · EN 358 | EN 361 · IS 3521-1 |
| View → | View → | View → | View → | View → | View → | This page | |
A harness is one part of a fall-arrest system
Fall arrester block
Retractable lifelines from 2 to 20 m, including a retrieval block and the Smart Block. Choose a block →
ConnectLanyards & connectors
Energy-absorbing and positioning lanyards, and EN 362 karabiners. Lanyards → · Connectors →
LanyardAnchors & lifelines
Anchor slings, a beam trolley, the Rapid Line and engineered fixed lifelines. Anchors → · Fixed Line Systems →
AnchorCommon questions
Can't find what you need? Call +91 8340 84 84 84 or write to info@jarshsafety.com.
What is the difference between ESH-03(DT), ESH-04 and ESH-05?
Which standards does it meet?
Is it suitable for outdoor use?
Do you supply in volume for contractors?
What is the service life and warranty?
Do you supply in bulk and work with dealers?
Get a quote for the EssentiA™ Harness.
Tell us the quantity, sizes and the work. We reply within 24 hours with pricing, lead time, the data sheet and certificates.
Our team replies within 24 hours.
