Lighting Solutions · Hazardous-area pocket torchATEX Micro Flash Light Pocket torch with a built-in beacon.
An 89 g pocket torch for hazardous areas with a rear red warning and orientation light, sealed Type-C direct charging, a segmented battery gauge and IP68 protection.
Built for hazardous work areas
Typical applications for this light. Use it only where its Ex marking matches your zone classification.
Rounds & permits
A pocket light for operators and permit holders in classified areas.
Marking a position
The rear red light works as a warning and orientation beacon.
Wet and washdown areas
IP68: keeps working after full submersion.
Emergency kits
Small and light enough to carry on every shift.
What it does, with the numbers
- Rear red beacon: A rear-integrated red light for warning and orientation.
- Type-C direct charging: Explosion-proof sealed Type-C port; charges in about 2 h 30 min.
- Battery gauge: Segmented indicator shows remaining capacity.
- Three modes: Work, high and strobe; 300 lm standard, 500 lm optional.
Rear red beacon
A rear-integrated red light for warning and orientation.
BeaconType-C direct charging
Explosion-proof sealed Type-C port; charges in about 2 h 30 min.
Type-CBattery gauge
Segmented indicator shows remaining capacity.
GaugeThree modes
Work, high and strobe; 300 lm standard, 500 lm optional.
300 / 500 lmIP68 sealing
Completely dustproof and waterproof; operates after full submersion.
IP68Diamond-pattern grip
High-precision knurled body for a secure grip with gloves.
89 gA closer look
Full technical specifications
From the current Jarsh technical data sheet. Ask us for the data sheet PDF with your quote.
Full specificationsJS-FL-ATEX-MICRO
Light
- Rated power
- 3 W / 300 lm (5 W / 500 lm optional)
- Modes
- Work → high → strobe
- Rear light
- Red warning and orientation light / beacon
Battery & runtime
- Battery
- DC 3.7 V / 1.9 Ah, dedicated battery
- Charging
- Type-C direct charging, about 2 h 30 min
- Battery indicator
- Segmented capacity indicator
- Runtime
- Work ≤ 9 h 20 min · high ≤ 6 h · blinking ≤ 4 h 50 min
Build
- Size
- Length 121.5 mm · body Ø23.2 mm
- Weight
- 89 g
- Grip
- Diamond-pattern body
- Ingress protection
- IP68
Hazardous area
- Ex marking & certificate
- Supplied with your quotation
Jarsh JS-FL-ATEX-MICRO ATEX Micro Flash Light technical data sheet, V0.2 · 10.2025.
How long each mode lasts
Ratings you can check
As stated on the technical data sheet.
Ingress protection IP68
Completely dustproof and waterproof; keeps working after full submersion.
Ex marking & certificate
Supplied with your quotation, to check against your zone classification.
Hazardous areas: Each ATEX light ships with its Ex marking and certificate. We include both with your quotation so you can check them against your zone classification before you order. Ask for the documents →
Safe use in hazardous areas
- Check the Ex marking on the torch and its certificate against your zone classification before use.
- Charge only in a safe (non-hazardous) area, and close the Type-C port before entering the zone.
- Use only the dedicated battery.
- Inspect the lens, body and port seal before each entry.
Compare the ATEX lights
The three ATEX lights side by side. Or see the full Lighting Solutions range.
| JHWL-ATEXATEX Headlamp | JS-IL-ATEXATEX Flash Light | JS-FL-ATEX-MICROATEX Micro Flash Light | |
|---|---|---|---|
| Type | Headlamp (spot + flood) | Inspection torch | Pocket torch + beacon |
| Light | 2 × 3 W / 2 × 300 lm | 300 lm (500 lm option) | 300 lm (500 lm option) |
| Modes | Work · high · strobe | Work · high · strobe | Work · high · strobe |
| Work-mode runtime | ≤ 10 h | ≤ 7 h 30 min | ≤ 9 h 20 min |
| Battery | 3.7 V / 2.6 Ah Li-ion | 3.7 V / 2.2 Ah | 3.7 V / 1.9 Ah |
| Charging | About 3 h 37 min | Direct DC, ~2 h 40 min | Type-C, ~2 h 30 min |
| Ingress protection | IP68 | IP66 | IP68 |
| Weight | 105 g bare · 220 g set | 170 g | 89 g |
| Size | 80 × 54 × 42 mm | 160 mm × Ø35 mm | 121.5 mm × Ø23.2 mm |
| View → | View → | This page |
Common questions
Can't find what you need? Call +91 8340 84 84 84 or write to info@jarshsafety.com.
Is it ATEX certified?
What is the red light at the back for?
How long does it run?
How is it charged?
Can it get wet?
Do you supply in bulk and work with dealers?
Get a quote for the ATEX Micro Flash Light.
Tell us the quantity, your site and how you'll use it. We reply within 24 hours with pricing, lead time and the data sheet, plus the Ex marking and certificate.
Our team replies within 24 hours.