Fall Protection · Harnesses, blocks & lifelinesFall protection, as a complete system.
Full body harnesses for every kind of work at height, retractable fall arrester blocks from 2 to 20 m, lanyards, anchors, rescue equipment, ready-made kits, engineered fixed lifelines and smart monitoring. Every product is specified from its data sheet, so you can match it to the task.
Anchor, body, connect, and a rescue plan
Every part has to be rated for the job and compatible with the rest. We'll help you build the system, not just sell a part.
Anchor
A point rated to hold a fall: a structural anchor, a fixed lifeline or a portable anchor.
Body
A full body harness spreads the arrest force across the thighs, pelvis and chest.
Connect
A retractable block or energy-absorbing lanyard links the two and limits the force.
Rescue
A plan and equipment to reach a suspended worker quickly.
Start with the work, then pick the harness
Pro-Guard for specialist work, EssentiA™ for everyday crews, Kavach™ for live-line work. Lanyard sets PGH-19 and PGH-18 are on the PGH-05 page. Every number on these pages comes from the product's current data sheet.
Confined space, ladders & shafts
Sternal O-ring for entry and retrieval. Pro-Guard PGH-01 →
Confined spaceGeneral fall arrest, long shifts
Mesh padding and a sit strap, users up to 140 kg. Pro-Guard PGH-02 →
GeneralTowers, rescue & rope access
Five attachment points, EN 813 ventral. Pro-Guard PGH-05 →
Tower & rescueWhere static discharge is a hazard
Antistatic webbing, aluminium hardware. Pro-Guard PGH-07(AS) →
AntistaticNear electrical hazards
Dielectric, polymer-coated hardware, users up to 140 kg. Pro-Guard PGH-03 (DE) →
DielectricLinemen near live conductors
Non-conductive, with 220 V–66 kV voltage detection. Kavach™ Dielectric →
Electrical
Pro-Guard Confined Space Harness
Confined-space entry, ladders and shafts: sternal O-ring, dorsal D-ring and side D-rings on 25 kN orange webbing.
Pro-Guard Full Body Harness
All-day fall arrest: mesh-padded straps, sit strap, aluminium buckles, 1.75 kg, users up to 140 kg.
Pro-Guard Jacket Harness
A harness and a hi-vis jacket in one: 950 g, reflective tape, front zip, yellow or orange.
Pro-Guard Tower & Rescue Harness
Five attachment points, CED-coated fittings and EN 361 / 358 / 813 for towers, rescue and rope access. Also as lanyard sets PGH-19 and PGH-18.
Pro-Guard Antistatic Full Body Harness
Antistatic polyester webbing with aluminium hardware, for fall arrest where static discharge is a hazard.
Pro-Guard Dielectric Full Body Harness
Insulated, polymer-coated hardware for work near electrical hazards: dorsal, sternal and 2 lateral points, users up to 140 kg.
EssentiA™ Harness
Everyday fall arrest to EN 361 and IS 3521: 1.30 kg, 23 kN webbing, CED-coated steel, three versions.
Kavach™ Dielectric Harness
Fully non-conductive harness with a shoulder module that warns of live AC voltage from 220 V to 66 kV.
The harness range side by side
“—” means the data sheet doesn't state it; we confirm it with your quotation.
| PGH-01Confined Space | PGH-02Full Body | PGH-04Jacket | PGH-05Tower & Rescue | PGH-07(AS)Antistatic | PGH-03 (DE)Dielectric | ESH-03(DT)EssentiA™ | |
|---|---|---|---|---|---|---|---|
| Use | |||||||
| Best for | Confined space, ladders, shafts | General fall arrest, long shifts | Hi-vis sites, roads, tunnels | Towers, rescue, rope access | Where static discharge is a hazard | Near electrical hazards | Everyday construction crews |
| Attachment | |||||||
| Fall arrest | Dorsal D-ring · sternal O-ring | Dorsal D-ring · 2 chest loops | Dorsal D-ring · 2 chest loops | Dorsal · sternal | Dorsal D-ring · 2 front loops | Dorsal D-ring · sternal | Per version (see page) |
| Work positioning | 2 side D-rings | 2 lateral D-rings | 2 lateral D-rings | ||||
| Ventral (rope access) | |||||||
| Build | |||||||
| Webbing strength | 25 kN MBS | — | 22 kN min | — | 25 kN min | — | ≥ 23 kN |
| Hardware | Black-anodized steel, 15 kN | Aluminium buckles | Alloy-steel buckles | CED-coated alloy steel | Polished aluminium | Dielectric, polymer-coated | CED-coated steel |
| Salt-spray tested | — | — | — | 500 h+ | 500 h+ (D-ring) | — | 500 h |
| Weight | — | 1.75 kg | 950 g | 2.38 kg | — | 2.36 kg | 1.30 kg |
| Max user weight | — | 140 kg | — | — | — | 140 kg | — |
| Hi-vis | Orange webbing | Retro-reflective | Fluorescent jacket + tape | Reflective stitching | — | Reflective strips | |
| Standards (per data sheet) | |||||||
| Standards | EN 361 · EN 358 | EN 361 | EN 361 | EN 361 · 358 · 813 · 354 | EN 361 | EN 361 · EN 358 | EN 361 · IS 3521-1 |
| View → | View → | View → | View → | View → | View → | View → | |
Retractable lifelines from 2 to 20 metres
Choose by lifeline (stainless, galvanised or webbing), length and where it will be anchored. Need rescue too? The retrieval block has a built-in winch.
Freedom to move, and a short fall
A retractable block pays out and reels in its lifeline as the worker moves, and locks within a short distance if they fall. The three overhead series share the same EN 360:2002 test result.
- Under 6 kN braking force and under 2 m arrest distance (100 kg, 600 mm free fall)
- 13 kN static strength for 3 minutes
- Swivel anchorage eye and a load indicator on every hook
- The Mini block is also rated for foot-level anchorage and sharp edges
IronCladeX ATEX Fall Arrester Block
ATEX version for hazardous areas: stainless-steel wire rope, 6–20 m.
SafeLine XR GI Fall Arrester Block
Galvanised wire rope for general industry, 6–15 m; stainless-steel rope optional.
SafeLine XR Webbing Fall Arrester Block
Webbing lifeline, lighter than wire rope, 3–15 m.
Mini Fall Arrester Block
2 m personal block: 140 kg, horizontal and foot-level (fall factor 2), sharp-edge rated, from 862.5 g.
Retrieval Fall Arrester Block
Fall arrest plus a built-in winch to raise or lower the casualty. 20 m, EN 360 and EN 1496.
Smart Block™
Detects falls on a block within a minute and flags it Not Safe for Use, with LED and buzzer. IP65.
The block range side by side
“—” means the data sheet doesn't state it.
| EX-FASSIronCladeX ATEX | SX-FASSafeLine XR GI | SX-FAWSafeLine XR Webbing | SXPFAW-01Mini Block | |
|---|---|---|---|---|
| Best for | Hazardous (ATEX) areas | General industry | Lighter lifeline, finished surfaces | Edges, foot-level, personal use |
| Lifeline | 4.8 mm stainless-steel rope | 4.8 mm galvanised rope | Webbing | 21 mm webbing, MBS 20 kN |
| Lengths | 6 · 10 · 12 · 15 · 20 m | 6 · 10 · 12 · 15 m | 3 · 6 · 10 · 12 · 15 m | 2 m |
| Hook | Swivel aluminium, 23 kN | Swivel aluminium, 23 kN | Swivel snap hook, 23 kN | Swivel aluminium, 23 kN |
| Rated for horizontal & foot-level use | ||||
| Braking force (test) | < 6 kN | < 6 kN | < 6 kN | Energy absorber built in |
| Arrest distance (test) | < 2 m | < 2 m | < 2 m | — |
| Standard | EN 360:2002 | EN 360:2002 | EN 360:2002 | EN 360:2002 · VG11 RFU 11.060 |
| View → | View → | View → | View → |
Everything that completes the system
Connect the harness to the anchor, and plan the rescue. Every product carries its code and the specs from its data sheet.
Lanyards
Energy-absorbing, work-positioning, dielectric and tool lanyards.
See the range →
Anchors & Connectors
Anchor slings, a beam trolley, the Rapid Line lifeline and EN 362 carabiners.
See the range →
Rescue & Retrieval
RapidEvaQ™, tripod, stainless davit, rescue winch, pulleys and rescue pole.
See the range →
Rope Access & Work Positioning
Ascender, self-braking descender, rope grab, work seat, gloves and kit.
See the range →
Safety Kits
Six ready-made kits for confined space, rescue, rope access and painting.
See the range →Anchors you can't forget, and lines that report back
Fixed Line Systems
Engineered horizontal and vertical lifelines for roofs, ladders and overhead runways, with site survey and installation.
LineAlert™
Watches lifeline tension and alerts your team to falls, slack and wear, over LTE.
Kavach™ Dielectric Harness
Fall protection that won't conduct, with voltage detection on the shoulder.
Equipping a crew, a site or a store?
One quote for the whole system
Tell us the tasks, headcount and anchor points. We'll recommend harnesses, blocks and lifelines that work together, and send one quotation with data sheets and certificates.
- Tell us the job: tasks, heights, anchor points, headcount.
- Get a recommendation: a compatible system with sizes and lengths.
- Receive one quote within 24 hours: pricing, lead time and documents.
Stock Jarsh fall protection
Harnesses and blocks are repeat purchases for contractors, utilities and industrial stores. Partner with us to stock the range in your territory.
- Dealer pricing across harnesses and blocks
- Product images and data for your catalogue
- Support from our sales team on larger projects
Common questions
Can't find what you need? Call +91 8340 84 84 84 or write to info@jarshsafety.com.
Which harness should I choose?
What happened to the Kavach Confined Space Harness?
Which block length do I need?
Can I anchor a block at foot level?
Which block is for hazardous areas?
What do I need for rescue?
How often should harnesses and blocks be inspected?
Do you supply in bulk and work with dealers?
Protect every worker at height.
Tell us the work, the heights and the anchor points. We'll recommend a complete system and reply within 24 hours with one quotation.
Our team replies within 24 hours.