Fall Protection · LanyardsLanyards The connection that takes the load.

Energy-absorbing lanyards for fall arrest, adjustable lanyards for work positioning, a dielectric lanyard for work near electrical installations, and tool lanyards that stop dropped objects. Every spec below comes from the product's data sheet.

Get a quote See the range
Jarsh JATL energy-absorbing twisted rope lanyard with steel tower hooks
100% tie-offTwin-leg lanyards
EN 355Energy absorbers
EN 358Work positioning
1.5–2.0 mLengths
25 kNJATL rope strength
10 kgTool lanyard capacity
Choose by job

Start with the work

Climbing and moving between anchors

A twin-leg energy-absorbing lanyard keeps one leg clipped at all times: JRL-T, JRL-W, JATL or JRL-R.

Fall arrest

Working near electrical installations

JWL-DE (2.0M) has dielectric scaffold hooks to minimise conductivity.

Dielectric

Holding position, both hands free

An adjustable lanyard between the harness side D-rings: JKWP (rope) or JTWPL (webbing).

Positioning

Tools at height

JTL01 tethers a tool of up to 10 kg to your belt or harness.

Dropped objects
Fall arrest · EN 355

Energy-absorbing lanyards

For fall arrest. The absorber limits the force on the body if the worker falls. Always plan the clearance below the anchor.

Jarsh Energy Absorbing Double Lanyard JRL-T
JRL-T

Energy Absorbing Double Lanyard

Twin-leg twisted-rope lanyard with an energy absorber, one carabiner and two scaffold hooks, for 100% tie-off.

Rope
12 mm, 3-strand twisted
Lengths
1.5 m · 1.8 m · 2.0 m
Harness end
1 carabiner
Anchor end
2 alloy-steel scaffold hooks
Absorber
Textile energy absorber
Option
Captive-pin variant
EN 355:2002

Data sheet V0.2 · 12.2025

Get a quote
Jarsh Energy Absorbing Lanyard (Webbing) JRL-W
JRL-W

Energy Absorbing Lanyard (Webbing)

Forked 44 mm webbing lanyard. The absorber end loops straight through the harness D-ring, with no connector to fit.

Webbing
Polyester, 44 mm
Lengths
1.5 m · 1.8 m · 2.0 m
Harness end
Webbing loop through the dorsal D-ring
Anchor end
2 steel scaffold hooks
Absorber
Integrated, at the harness end
EN 355:2002IS 3521 (Part 2):2021

Data sheet V0.2 · 03.2026

Get a quote
Jarsh Energy Absorbing Twisted Rope Lanyard JATL
JATL

Energy Absorbing Twisted Rope Lanyard

Y-shaped twisted-rope lanyard with steel tower hooks, a protective sleeve and a red strand that shows wear.

Rope
12 mm, 3-strand twisted polyamide; MBS 25 kN
Hooks
Steel tower hooks, 23 kN, 85 mm gate, golden passivation
Lengths & weights
1.5 m 1.91 kg · 1.8 m 1.96 kg · 2.0 m 2.00 kg
Protection
Polyethylene sleeve; thimbles in the side loops
Wear indicator
Red strand shows material degradation
EN 355:2002IS 3521 (Part 2):2021VG11 RfU CNB/P/11.063

Data sheet V0.2 · 02.2026

Get a quote
Jarsh Kernmantle Double Rope Shock-Absorber Lanyard JRL-R
JRL-R

Kernmantle Double Rope Shock-Absorber Lanyard

Forked 11 mm kernmantle lanyard, 1.8 m, with a carabiner and shock absorber at the harness end and two scaffolding hooks.

Rope
Kernmantle, 11 mm
Length
1.8 m
Harness end
Carabiner with integrated shock absorber
Anchor end
2 steel scaffolding hooks
Impact force
Absorber limits it to ≤ 6 kN
EN 355:2002IS 3521 (Part 2):2021

Data sheet V0.2 · 03.2026

Get a quote
Jarsh Dielectric Shock Absorbing Forked Lanyard JWL-DE (2.0M)
JWL-DE (2.0M)

Dielectric Shock Absorbing Forked Lanyard

Twin-leg webbing lanyard with dielectric scaffold hooks, for work at height near energised installations.

Length
2.0 m
Webbing
High-strength polyester, 30 mm
Weight
1720 ± 10 g
Harness end
Steel locking carabiner
Anchor end
2 dielectric scaffold hooks
Absorber
Integrated
EN 355:2002VG11/RfU Sheet 63IS 3521 (Part 2):2021

Data sheet V0.2 · 07.2026

Get a quote
Jarsh Forked Lanyard with Energy Absorber JRL-DT (1.8) · JRL-DT (2.0)
JRL-DT (1.8) · JRL-DT (2.0)

Forked Lanyard with Energy Absorber

Twin-leg 12 mm twisted polyamide lanyard with lightweight aluminium scaffold hooks and a red tracer strand that shows wear.

Lengths
1.8 m (JRL-DT (1.8)) · 2.0 m (JRL-DT (2.0))
Rope
Twisted polyamide, 12 mm
Harness end
Steel screw-locking carabiner
Anchor end
2 aluminium scaffold hooks
Protection
Polyethylene sleeves; abrasion-resistant thimbles
Wear indicator
Red tracer strand
EN 355:2002VG11 RfU CNB/P/11.063IS 3521 (Part 2):2021

Data sheet V0.2 · 07.2026

Get a quote
Jarsh FR Energy Absorbing Forked Webbing Lanyard JWL-FR (2.0M)
JWL-FR (2.0M)

FR Energy Absorbing Forked Webbing Lanyard

Flame-resistant twin-leg lanyard for work near heat, sparks and molten metal, with Kevlar stitching and an FR shock-pack cover.

Length
2.0 m
Webbing
Treated flame-retardant yarn, 44 ± 1 mm, > 30 kN
Stitching
Kevlar
Arrest force
≤ 6 kN
Static test
15 kN for 3 minutes
Dynamic test
140 kg, 4 m free fall
Weight
About 1800 g
Connectors
Steel locking carabiner; steel scaffold hooks
EN 355:2002EN ISO 15025:2015ISO 9150:1988

Data sheet V0.2 · 07.2026

Get a quote
Jarsh Antistatic Webbing Lanyard JRL-W(AS)
JRL-W(AS)

Antistatic Webbing Lanyard

Forked energy-absorbing lanyard on 30 mm antistatic webbing, with aluminium hardware, for use with an antistatic harness.

Webbing
Antistatic, 30 mm
Lengths
1.5 m · 1.8 m · 2.0 m
Harness end
Aluminium carabiner with integrated energy absorber
Anchor end
2 aluminium rebar hooks
EN 355:2002

Data sheet V0.2 · 03.2026

Get a quote
Jarsh Suspension Intolerance Strap JSIS-01
JSIS-01

Suspension Intolerance Strap

A strap in a pouch on the harness. After a fall, the worker deploys it and stands in it to relieve leg pressure while waiting for rescue.

Webbing
High-strength polyester, 20 ± 1 mm, 200 kgf
Buckle
Steel, zinc plated
Adjustment
Multiple height loops
Storage
Integrated textile pouch
Weight
110 ± 10 g

Data sheet V0.2 · 07.2026

Get a quote
Work positioning · EN 358

Work-positioning lanyards

Clip between the harness side D-rings to hold a working position with both hands free. Work positioning is not fall arrest: use it with a separate fall-arrest system where a fall is possible.

Jarsh Kernmantel Work Positioning Lanyard with Rope Adjuster JKWP
JKWP

Kernmantel Work Positioning Lanyard with Rope Adjuster

12 mm kernmantle rope with an openable aluminium rope-grab adjuster and a steel carabiner at each end.

Rope
Kernmantle, 12 mm
Adjuster
Aluminium rope grab (openable blocker RG07)
Ends
Steel carabiner at both ends
Maximum length
2.0 m
Breaking strength
15 kN minimum
EN 358:2018

Data sheet V0.2 · 04.2026

Get a quote
Jarsh Work Position Lanyard (Webbing) JTWPL
JTWPL

Work Position Lanyard (Webbing)

33 mm webbing lanyard with a ring-type length adjuster and steel carabiners, for the lateral D-rings.

Webbing
High-tenacity polyester, 33 mm
Adjuster
Ring-type steel adjuster
Ends
Alloy-steel carabiner at both ends
Maximum length
2.0 m
Breaking strength
15 kN minimum
EN 358:2018

Data sheet V0.2 · 12.2025

Get a quote
Dropped objects

Tool lanyards

Keep tools attached to the worker, so nothing falls on the people below.

Jarsh Tool Lanyard JTL01
JTL01

Tool Lanyard

Elasticated tool lanyard: a mini carabiner for the belt or harness, and a braided cord with cord lock for the tool.

Webbing
Tubular elasticated polyester, 20 mm
Length
85 cm relaxed · 135 cm extended
Tool capacity
Up to 10 kg
Belt / harness end
Mini carabiner
Tool end
Braided cord with cord lock

Data sheet V0.2 · 04.2026

Get a quote
Jarsh Single Leg Tool Lanyard JSTL01
JSTL01

Single Leg Tool Lanyard

A light stretch tool lanyard with a steel mini carabiner, for hand tools.

Webbing
Elasticated polyester, 20 mm
Length
889 mm relaxed · 1346 mm extended
Tool capacity
Up to 4.53 kg (10 lb)
Weight
About 60 g
Connector
Steel mini carabiner

Data sheet V0.2 · 12.2025

Get a quote
Compare

The lanyards range at a glance

“—” means the data sheet doesn't state it; we confirm it with your quotation.

CodeProductTypeKey figureStandard
JRL-TEnergy Absorbing Double LanyardTwin leg, twisted rope1.5 / 1.8 / 2.0 mEN 355:2002
JRL-WEnergy Absorbing Lanyard (Webbing)Twin leg, webbing1.5 / 1.8 / 2.0 mEN 355:2002 · IS 3521 (Part 2):2021
JATLEnergy Absorbing Twisted Rope LanyardTwin leg, twisted rope, tower hooks1.5 / 1.8 / 2.0 mEN 355:2002 · IS 3521 (Part 2):2021 · VG11 RfU CNB/P/11.063
JRL-RKernmantle Double Rope Shock-Absorber LanyardTwin leg, kernmantle rope1.8 mEN 355:2002 · IS 3521 (Part 2):2021
JWL-DE (2.0M)Dielectric Shock Absorbing Forked LanyardTwin leg, webbing, dielectric hooks2.0 mEN 355:2002 · VG11/RfU Sheet 63 · IS 3521 (Part 2):2021
JRL-DT (1.8) · JRL-DT (2.0)Forked Lanyard with Energy AbsorberTwin leg, twisted rope, aluminium hooks1.8 / 2.0 mEN 355:2002 · VG11 RfU CNB/P/11.063 · IS 3521 (Part 2):2021
JWL-FR (2.0M)FR Energy Absorbing Forked Webbing LanyardTwin leg, flame-resistant webbing2.0 mEN 355:2002 · EN ISO 15025:2015 · ISO 9150:1988
JRL-W(AS)Antistatic Webbing LanyardTwin leg, antistatic webbing1.5 / 1.8 / 2.0 mEN 355:2002
JSIS-01Suspension Intolerance StrapSuspension trauma relief110 g—
JKWPKernmantel Work Positioning Lanyard with Rope AdjusterRope, adjustableUp to 2.0 mEN 358:2018
JTWPLWork Position Lanyard (Webbing)Webbing, adjustableUp to 2.0 mEN 358:2018
JTL01Tool LanyardElasticated tool tetherUp to 10 kg—
JSTL01Single Leg Tool LanyardElasticated tool tetherUp to 4.53 kg—
Use, inspection & care

Inspect it, every time

Train every user, follow the user instructions supplied with each product, and have a rescue plan ready.

  • Inspect before every use: webbing or rope, stitching, the energy-absorber pack and every hook and carabiner gate.
  • Withdraw any lanyard whose energy absorber has deployed, or that has arrested a fall.
  • Check clearance: a fall on an energy-absorbing lanyard needs the lanyard length, the absorber's extension, the worker's height and a safety margin below the anchor.
  • Don't tie a lanyard back on itself or knot it, and keep it away from sharp edges unless it is rated for them.
  • Use work-positioning lanyards only for positioning, together with a fall-arrest system where a fall is possible.
  • Store dry, away from UV, heat and chemicals.
Complete the system

Part of a complete fall-protection system

Harness

Every system connects to the fall-arrest point of a full body harness. Choose a harness →

Body

Fall arrester block

Retractable lifelines from 2 to 20 m, including a retrieval block and the Smart Block. Choose a block →

Connect

Lanyards & connectors

Energy-absorbing and positioning lanyards, and EN 362 carabiners. Lanyards → · Connectors →

Lanyard

Anchors & lifelines

Anchor slings, a beam trolley, the Rapid Line and engineered fixed lifelines. Anchors → · Fixed Line Systems →

Anchor

Rescue

Descent devices, tripods, davits, winches and ready-made kits. Rescue → · Kits →

Rescue
FAQ

Common questions

Can't find what you need? Call +91 8340 84 84 84 or write to info@jarshsafety.com.

Which lanyard should I use with a full body harness for fall arrest?
An energy-absorbing lanyard (EN 355) connected to the dorsal or sternal fall-arrest point. For moving between anchors, choose a twin-leg version so one leg is always connected.
Can I use a work-positioning lanyard for fall arrest?
No. JKWP and JTWPL are for work positioning (EN 358). Use them between the harness side D-rings, with a separate fall-arrest system where a fall is possible.
Is JWL-DE insulated for live work?
It has dielectric scaffold hooks to minimise conductivity near energised installations. The data sheet gives no voltage rating, so follow your electrical safe-work procedures.
What lengths are available?
JRL-T, JRL-W, JRL-W(AS) and JATL come in 1.5, 1.8 and 2.0 m. JRL-DT comes in 1.8 m and 2.0 m. JRL-R is 1.8 m; JWL-DE and JWL-FR are 2.0 m. JKWP and JTWPL adjust up to 2.0 m.
Do you supply in bulk and work with dealers?
Yes. Request a quote with codes and quantities. To stock the range, apply to become a dealer.

Get a quote for lanyards.

Send us the codes and quantities, or tell us the job. We reply within 24 hours with pricing, lead time and data sheets.

Request a quote

Our team replies within 24 hours.

+91 8340 84 84 84Call our team, Mon–Sat 10:00–18:30 IST
WhatsApp +91 70750 82311Send the product, quantity and city
info@jarshsafety.comEmail us your BOQ or tender document
Become a dealerDistributor and channel-partner enquiries
Partner Login