Lighting Solutions · Portable & hazardous-areaLight the work. Wherever it happens.

Head torches for hands-free work, telescopic and area lights for bays, yards and shutdowns, the BeamBox for remote sites, and a separate ATEX range for hazardous areas. One supplier for every lighting need on your site.

Get a lighting quote Find the right light
Jarsh 6 ft area light illuminating a dark industrial shed
Head · area · tower · suitcaseIP44 to IP68ATEX range
7 lightsHead, hand, area, tower
10,500 lm6 ft area light, max
150 lm/WTelescopic efficiency
18 VRuns on tool batteries
Up to IP68ATEX torch and headlamp
172 gHard hat work light
Find your light

Start with the job, not the lumens

Most sites need more than one kind of light. Pick by where people work and how they carry it.

Hands-free at the work face

Linemen, maintenance crews, confined-space and night shifts. Hard Hat Work Light →

Head torch

Lighting a bay, yard or shutdown

Up to 10,000 lm on a 1.55 m mast from an 18 V tool battery. Telescopic Worklight →

Tower

Light plus charging, off-grid

A 6 ft area light that also charges phones, radios and tools. 6 ft Remote Area Light →

Area + dock

Remote sites and emergencies

Grab-and-go carry case, up to 6,000 lm and 9 hours. BeamBox →

Suitcase

Explosive atmospheres

Refineries, gas plants, tank cleaning. Use only the ATEX range. ATEX lights →

Hazardous area

Kitting out a whole site

Send us the tasks and headcount; we'll recommend the mix and quote it. Ask for a site kit →

Projects
Work & area lighting

Four lights, four ways to work

Every number below comes from the product's current technical data sheet.

Jarsh JHWL hard hat work light strapped to a white safety helmet
JHWL head torch with its helmet clipsJHWL head torch beside a safety helmetHigh/low switch and round DC charging socket on the JHWL
Head torch

Hard Hat Work Light

JHWL

A 172 g helmet-mounted head torch for hands-free work: two brightness levels, a detachable lamp, IP65 sealing and a 6-month warranty.

172 gWeight ±5 g
IP65Dust-tight, water-resistant
4 hBackup on low
6000 KCool white
  • High 3 W / low 1 W: one switch, two brightness levels
  • Detachable lamp on an elastic belt; fits over a safety helmet
  • 1200 mAh lithium cell, charges in 3–4 hours from a USB adapter or wired charger
  • OSRAM, EDISION or TOP LIGHT 3535 LEDs; LM-80 report available
Key specificationsJHWL

Light

LED
3535 lens LED (OSRAM / EDISION / TOP LIGHT)
LED power
1 W low · 3 W high
Modes
2: high and low
Colour temperature
6000 K, cool white
LED LM-80 report
Available

Battery & charging

Battery
Lithium cell, 1200 mAh, 3.2 V
Backup
4 hours on low
Charger
Adapter with USB cable or wire
Input
230 VAC 50 Hz · 4 VDC 500 mA
Charger output
5.5 V, 500 mA
Charging time
3–4 hours
Battery cut-off
Yes

Build

Lamp
Detachable, for flexible use
Mounting
Elastic belt over the helmet
Ingress protection
IP65
Dimensions
80 × 60 × 95 mm (W × H × D)
Weight
172 g ±5 g

Quality

Testing
NABL (as stated on the data sheet)
Warranty
6 months

Jarsh JHWL Hard Hat Work Light technical data sheet.

View product Get a quote →
Jarsh JL-RL-5Ft telescopic worklight on its folding floor stand
Fitting an 18 V power-tool battery to the telescopic worklightLED head of the telescopic worklight on its aluminium mastAdjusting the telescopic worklight head with a gloved hand
Tower light

Telescopic Worklight

JL-RL-5Ft

Up to 10,000 lumens on a 1.55 m telescopic mast, powered by the 18 V tool batteries your crew already carries.

10,000 lmHigh mode
150 lm/WEfficiency
1.55 mMast height
4.2 kgNet weight
  • Runs on 18 V packs from DeWalt, Milwaukee, Black & Decker / Porter-Cable, Stanley, Makita and Bosch; battery included
  • Four modes: 10,000 / 5,000 / 3,000 / 1,000 lm
  • 120° beam from 120 SMD LEDs, 5500–6000 K
  • IP65, folds to 23 × 17.6 × 102 cm for transport
Key specificationsJL-RL-5Ft

Light

Light source
LED, 120 pcs SMD
Luminous flux
Up to 10,000 lm
Efficiency
150 lm/W
Beam angle
120°
Colour temperature
5500–6000 K
Emitting colour
White
Rated LED life
30,000 hours

Modes & runtime

High
10,000 lm · 45 min
Medium
5,000 lm · 1 h 40 min
Low
3,000 lm · 2 h 40 min
Eco
1,000 lm · 5 h 40 min

Power

Power source
External 18 V lithium battery
Battery included
Yes
Input voltage (AC)
220 V ±10%
Compatible platforms
DeWalt, Milwaukee, Black & Decker / Porter-Cable, Stanley, Makita, Bosch

Build

Lamp body
ABS
Structure
PC + ABS + aluminium
Mounting
Floor stand
Extended height
1.55 m
Folded size
23 × 17.6 × 102 cm
Ingress protection
IP65
Working temperature
Up to 45 °C
Net weight
4.2 kg

Jarsh JL-RL-5Ft Telescopic Worklight technical data sheet, V0.2 · 12.2025.

View product Get a quote →
Jarsh JL-RL-6Ft portable area light with its mast fully extended
6 ft area light lighting a dark industrial shedLED head of the 6 ft area light6 ft area light folded with the head lowered
Area light + power dock

6 ft Remote Area Light

JL-RL-6Ft

A self-contained area light that extends to 6 ft, with spot, flood and blended beams, a display, and USB-C / USB-A outputs to charge phones, radios and tools on site.

10,500 lmMaximum output
6 ftExtended height
4 modesSpot · flood · blended · flash
4.2 kgApprox. weight
  • Power dock: USB-C and USB-A outputs at 5 V/3 A, 9 V/2 A or 12 V/1.5 A
  • Dimming in ±10% steps with infinite hold; remembers the last setting
  • Charges anywhere: AC adapter (100–250 V), 12 V car adapter or USB-C PD 3.1
  • IP44 splash- and dust-resistant; for covered or dry-weather use
Key specificationsJL-RL-6Ft

Light

Light output
Up to 10,500 lm
Modes
Spot, flood, blended, rapid flash
Beam
Adjustable spot and flood
Dimming
±10% step and infinite hold control
Memory
Remembers last setting when switched off and on
Control
Buttons with display screen

Power

Battery
Internal rechargeable lithium-ion
Battery level
Shown on the display
Charging
AC/DC adapter (100–250 V), 12 V car adapter, USB-C PD 3.1
USB-C output
5 V/3 A · 9 V/2 A · 12 V/1.5 A
USB-A output
5 V/3 A · 9 V/2 A · 12 V/1.5 A
Power dock
For DC-powered USB devices

Build

Maximum height
Up to 6 ft
Stand
Retractable telescopic stand
Material
ABS, PC and aluminium
Ingress protection
IP44 (not jet- or immersion-proof)
Weight
Approx. 4.2 kg

Jarsh JL-RL-6Ft Portable and Foldable Remote Area Light technical data sheet. Battery capacity and runtime are not yet on the data sheet; ask us for your duty cycle.

View product Get a quote →
Jarsh BeamBox suitcase area light with its LED panel raised on the mast
BeamBox packed into its rugged carry caseBeamBox LED panel with the flood diffuser fittedRear of the BeamBox LED panel and mast
Suitcase area light

BeamBox

JL-RL-1.5Ft

A rugged carry case with a 24-LED head on an 81 cm mast: spot or flood up to 6,000 lumens, three brightness levels, and up to 9 hours from its 8800 mAh battery.

6,000 lmSpot or flood, strong
9 hRuntime on low
IP65Dust-tight, jet-resistant
5.45 kgWeight
  • Spot and flood, switchable, each up to 6,000 lm on strong
  • 4 / 5 / 9 hours runtime; charges in about 3.5 hours
  • Aluminium body, polycarbonate lens and 304 stainless screws
  • 12 V DC input for vehicle and site supplies
Key specificationsJL-RL-1.5Ft

Light

LEDs
24 × 3 W
Modes
Spot and flood, switchable
Spot output
6,000 lm strong · 3,000 lm middle · 1,500 lm low
Flood output
6,000 lm strong · 2,800 lm middle · 1,500 lm low
Colour temperature
6000–7000 K
LED life
More than 50,000 hours

Power

Input
12 V DC, rated current 2.6 A
Rated power
72 W
Power output (12 V)
28.8 W strong · 15.84 W middle · 8.52 W low (±10%)
Battery
8800 mAh rechargeable
Runtime
4 h strong · 5 h middle · 9 h low
Charging time
About 3.5 hours

Build

Body
Aluminium, spray-painted finish
Lens
Polycarbonate
Tripod
ABS plastic
Screws
304 stainless steel
Maximum height
81 cm
Lamp head
215 × 175 × 45 mm (flood) · 330 × 170 × 42 mm (spot)
Ingress protection
IP65
Weight
5.45 kg

Jarsh JL-RL-1.5Ft BeamBox (Portable Suitcase Area Light) technical data sheet.

View product Get a quote →
Compare

The work and area lights side by side

“—” means the data sheet doesn't state it. “On request” and “Ask us” values are confirmed with your quotation.

JHWLHard Hat Work LightJL-RL-5FtTelescopic WorklightJL-RL-6Ft6 ft Area LightJL-RL-1.5FtBeamBox
Use
TypeHelmet head torchTelescopic towerArea light + power dockSuitcase area light
Best forHands-free tasksBays, yards, shutdownsOff-grid sites, chargingRemote and emergency work
Light
Maximum output3 W LED (high mode)10,000 lm10,500 lm6,000 lm
ModesHigh · lowHigh · medium · low · ecoSpot · flood · blended · flashSpot / flood × 3 levels
Colour temperature6000 K5500–6000 K—6000–7000 K
Rated LED life—30,000 h—> 50,000 h
Power
Power source1200 mAh Li cell18 V tool battery (included)Internal Li-ion8800 mAh battery
Runtime4 h on low45 min high → 5 h 40 min ecoOn request4 h → 9 h
Charging3–4 h, USB adapterSwap the 18 V packAC, 12 V car, USB-C PDAbout 3.5 h, 12 V DC
Charges other devices
Build
Height—1.55 mUp to 6 ft81 cm
Ingress protectionIP65IP65IP44IP65
Weight172 g4.2 kg≈ 4.2 kg5.45 kg
Warranty (per data sheet)6 monthsAsk usAsk usAsk us
View →View →View →View →
Runtime

How long each mode lasts

Both charts use the same scale, so you can compare the two lights directly.

Telescopic Worklight JL-RL-5Ft

Telescopic Worklight runtime per mode
ModeValue
High · 10,000 lm45 min
Medium · 5,000 lm1 h 40 min
Low · 3,000 lm2 h 40 min
Eco · 1,000 lm5 h 40 min

Per the data sheet. Runtime also depends on the capacity of the 18 V pack fitted; carry a spare pack for a full shift on high.

BeamBox JL-RL-1.5Ft

BeamBox runtime per mode
ModeValue
Strong · 6,000 lm4 h
Middle · 3,000 lm5 h
Low · 1,500 lm9 h

Per the data sheet, from the built-in 8800 mAh battery (spot-mode lumens shown). Charging takes about 3.5 hours.

Planning a night shift? Brightest isn't always best. On the telescopic light, medium mode (5,000 lm) runs more than twice as long as high, and eco mode runs more than seven times as long. Tell us your shift pattern and we'll size the batteries.

Hazardous areas

ATEX lighting for explosive atmospheres

Two torches and a headlamp for refineries, gas plants, chemical works and tank entry. Each runs work, high and strobe modes.

Jarsh ATEX Light Headlamp JHWL-ATEX with spot and flood heads
JHWL-ATEX

ATEX Light Headlamp

Dual spot + flood heads on a tilting body, with elastic straps that fit over helmets.

IP68Ingress protection
≤ 10 hWork mode
105 gBare lamp
2.6 AhLi-ion pack
View product →
Jarsh ATEX Flash Light JS-IL-ATEX
JS-IL-ATEX

ATEX Flash Light

Inspection torch with work, high and strobe modes and DC direct charging.

300 lmStandard (500 lm option)
IP66Ingress protection
≤ 7 h 30 minWork mode
170 gWeight
View product →
Jarsh ATEX Micro Flash Light JS-FL-ATEX-MICRO
JS-FL-ATEX-MICRO

ATEX Micro Flash Light

Pocket torch with a rear red warning light, Type-C direct charging and a battery gauge.

300 lmStandard (500 lm option)
IP68Ingress protection
≤ 9 h 20 minWork mode
89 gWeight
View product →

Use only ATEX-rated equipment in a classified zone. The work and area lights above are not specified for explosive atmospheres. Each ATEX light ships with its Ex marking and certificate. We include both with your quotation so you can check them against your zone classification before you order. Ask for ATEX documentation →

For teams, contractors & dealers

Buying lights for a crew, a site or a store?

Sites & contractors

One quote for the whole kit

Tell us the tasks, headcount and shift pattern. We'll recommend the mix of head torches, area lights and ATEX lights, size the batteries, and send one quotation with lead times.

  1. Tell us the job: tasks, headcount, hazardous zones, shift length.
  2. Get a recommendation: the right mix and quantities, with data sheets.
  3. Receive one quote within 24 hours: pricing and lead time for the full kit.
Request a site quote
Dealers & distributors

Stock Jarsh lighting

Head torches and portable area lights are repeat purchases for contractors, utilities and industrial stores. Partner with us to stock the range in your territory.

  • Dealer pricing for the full lighting range
  • Product images and data for your catalogue
  • Support from our sales team on larger projects
Apply to become a dealer
FAQ

Common questions

Can't find what you need? Call +91 8340 84 84 84 or write to info@jarshsafety.com.

Which light should I choose?
Pick by how the light is used. The Hard Hat Work Light keeps hands free. The Telescopic Worklight floods a bay from 18 V tool batteries. The 6 ft Remote Area Light lights an off-grid area and charges devices. The BeamBox is a grab-and-go case for remote or emergency work. In an explosive atmosphere, use only the ATEX range.
Can the telescopic worklight run on batteries we already own?
Yes. Per its data sheet it works with 18 V packs from DeWalt, Milwaukee, Black & Decker / Porter-Cable, Stanley, Makita and Bosch, and a battery is included.
How long do the lights run?
Telescopic Worklight: 45 min (10,000 lm) to 5 h 40 min (1,000 lm). BeamBox: 4, 5 or 9 hours. Hard Hat Work Light: 4 hours on low. The ATEX headlamp runs up to 10 hours in work mode. The 6 ft area light's runtime isn't on its data sheet yet, so ask us for your duty cycle.
Which lights can be used in the rain?
The Hard Hat Work Light, Telescopic Worklight and BeamBox are IP65: dust-tight and protected against water jets. The 6 ft area light is IP44, which covers splashes but not jets, so use it under cover. The ATEX Flash Light is IP66, and the ATEX Micro Flash Light and Headlamp are IP68.
Can I use these lights in a hazardous area?
Only the ATEX lights. The work and area lights are not specified for explosive atmospheres. Each ATEX light ships with its Ex marking and certificate. We include both with your quotation so you can check them against your zone classification before you order.
What warranty do the lights carry?
The Hard Hat Work Light carries a 6-month warranty, per its data sheet. We confirm warranty terms for the other lights with your quotation.
Do you supply in bulk and work with dealers?
Yes. For site kits and volume orders, request a quote. To stock the range, apply to become a dealer.

Light every shift, every site.

Tell us the tasks, quantities and where you work. We'll recommend the right mix and reply within 24 hours with one quotation.

Request a quote

Our team replies within 24 hours.

+91 8340 84 84 84Call our team, Mon–Sat 10:00–18:30 IST
WhatsApp +91 70750 82311Send the product, quantity and city
info@jarshsafety.comEmail us your BOQ or tender document
Become a dealerDistributor and channel-partner enquiries
Partner Login