Lighting Solutions · Hazardous-area headlampATEX Light Headlamp Spot and flood, hands-free, in hazardous areas.
A dual-light headlamp (spot + flood) for high-risk industrial environments: a tilting head, elastic straps that fit over helmets, a 2.6 Ah lithium pack, up to 10 hours in work mode and IP68 sealing.
Built for hazardous work areas
Typical applications for this light. Use it only where its Ex marking matches your zone classification.
Refineries & gas plants
Hands-free light for operators and maintenance crews in classified areas.
Tank cleaning & confined spaces
Flood for the space, spot for the detail, both hands on the ladder.
Chemical & pharma plants
Process-area maintenance where a standard headlamp isn't permitted.
Night shutdowns
Long work-mode runtime for full shifts.
What it does, with the numbers
- Dual-light engine: Spot and flood heads, 2 × 3 W / 2 × 300 lm, switchable to match the task.
- Tilt-adjustable head: Point the beam where you're working without moving your head.
- Fits helmets and heads: Elastic adjustable straps fit securely on helmets and all head sizes.
- Long runtime: Up to 10 h in work mode, 5 h 20 min in high and 9 h 40 min in strobe.
Dual-light engine
Spot and flood heads, 2 × 3 W / 2 × 300 lm, switchable to match the task.
Spot + floodTilt-adjustable head
Point the beam where you're working without moving your head.
TiltFits helmets and heads
Elastic adjustable straps fit securely on helmets and all head sizes.
StrapLong runtime
Up to 10 h in work mode, 5 h 20 min in high and 9 h 40 min in strobe.
≤ 10 hIP68 sealed
Completely dustproof and waterproof, even after full submersion.
IP68Light & tough
High-impact black polymer body with an anti-slip design: 105 g bare, 220 g full set.
105 gA closer look
Full technical specifications
From the current Jarsh technical data sheet. Ask us for the data sheet PDF with your quote.
Full specificationsJHWL-ATEX
Light
- Light engine
- Dual: spot + flood
- Rated power
- 2 × 3 W / 2 × 300 lm (spot + flood)
- Modes
- Work → high → strobe
- Head
- Tilt-adjustable
Battery & runtime
- Battery type
- Dual power system
- Primary power
- 3.7 V DC / 2.6 Ah Li-ion pack
- Charging time
- About 3 h 37 min
- Runtime
- Work ≤ 10 h · high ≤ 5 h 20 min · strobe ≤ 9 h 40 min
Build
- Dimensions
- 80 × 54 × 42 mm
- Weight
- Bare lamp 105 g · full set 220 g
- Body
- High-impact polymer, anti-slip design
- Mounting
- Elastic adjustable straps, fit helmets and all head sizes
- Ingress protection
- IP68
Hazardous area
- Ex marking & certificate
- Supplied with your quotation
Jarsh JHWL-ATEX ATEX Light Headlamp technical data sheet, V0.2 · 10.2025.
How long each mode lasts
Ratings you can check
As stated on the technical data sheet.
Ingress protection IP68
Completely dustproof and waterproof; operates after full submersion.
Ex marking & certificate
Supplied with your quotation, to check against your zone classification.
Hazardous areas: Each ATEX light ships with its Ex marking and certificate. We include both with your quotation so you can check them against your zone classification before you order. Ask for the documents →
Safe use in hazardous areas
- Check the Ex marking on the headlamp and its certificate against your zone classification before use.
- Charge and open the battery cap only in a safe (non-hazardous) area.
- Check the strap and helmet fit before each shift.
- Inspect the lenses, body and battery-cap seal before each entry.
Compare the ATEX lights
The three ATEX lights side by side. Or see the full Lighting Solutions range.
| JHWL-ATEXATEX Headlamp | JS-IL-ATEXATEX Flash Light | JS-FL-ATEX-MICROATEX Micro Flash Light | |
|---|---|---|---|
| Type | Headlamp (spot + flood) | Inspection torch | Pocket torch + beacon |
| Light | 2 × 3 W / 2 × 300 lm | 300 lm (500 lm option) | 300 lm (500 lm option) |
| Modes | Work · high · strobe | Work · high · strobe | Work · high · strobe |
| Work-mode runtime | ≤ 10 h | ≤ 7 h 30 min | ≤ 9 h 20 min |
| Battery | 3.7 V / 2.6 Ah Li-ion | 3.7 V / 2.2 Ah | 3.7 V / 1.9 Ah |
| Charging | About 3 h 37 min | Direct DC, ~2 h 40 min | Type-C, ~2 h 30 min |
| Ingress protection | IP68 | IP66 | IP68 |
| Weight | 105 g bare · 220 g set | 170 g | 89 g |
| Size | 80 × 54 × 42 mm | 160 mm × Ø35 mm | 121.5 mm × Ø23.2 mm |
| This page | View → | View → |
Common questions
Can't find what you need? Call +91 8340 84 84 84 or write to info@jarshsafety.com.
Is it ATEX certified?
Does it fit over a safety helmet?
Spot or flood: which do I get?
How long does it run?
How heavy is it?
Do you supply in bulk and work with dealers?
Get a quote for the ATEX Light Headlamp.
Tell us the quantity, your site and how you'll use it. We reply within 24 hours with pricing, lead time and the data sheet, plus the Ex marking and certificate.
Our team replies within 24 hours.